Virkon™ Dilution Test Strips (60 pcs) — Validate the Concentration of Your Virkon® Disinfectant Solution

With Virkon™ dilution test strips you can quickly and reliably validate whether your Virkon® disinfectant solution has the correct concentration. The strips work with a reactive colour indicator and are designed as a technical biosecurity instrument for professional use.

When to use

• Training — to verify dilution and preparation
• Solution in use — verification of the prepared solution over multiple days, e.g. when preparing volume for arch sprayers on vehicles, footbaths and wheel baths
• Hard surfaces — confirm efficacy directly after application on vehicles, buildings and equipment
• Disposal of solution — check remaining efficacy before disposal in accordance with local regulations

How to use

1. Remove the strip from the bottle and immediately replace the cap
2. Dip the strip for 5 seconds in a fully dissolved/prepared Virkon® solution
3. Remove the strip and carefully allow excess liquid to drain off
4. Start the timer — read the colour after 10 seconds
5. Compare the colour result with the colour scale on the packaging

Full colour development is visible only a few seconds after removing the strip from the solution.

Colour scale

Applications

• Verification of prepared Virkon® solutions in all applications
• Calibration of dosing equipment for disinfectant solutions
• Control of spray equipment for disinfectant solutions
• Validation of disinfectant solution on treated surfaces
• Control of disinfectant footbaths for required efficacy

Specifications

• Contents: 60 test strips per bottle
• Compatible with: Virkon® S, Virkon® S Tablets, Virkon® ISO, Virkon® Aquatic
• Method: Dip, wait and read
• Reading time: 10 seconds after removal from the solution